RUTLAND offers a wide range of quality products to maintain, clean, and repair wood or gas stoves, fireplaces, firepits, hearths, chimneys, and BBQs. RUTLAND serves the needs of homeowners and professionals alike. The product line includes fire starters, heat resistant cements and mortars, creosote and soot removers, high temperature silicone sealants, stove door and BBQ replacement gaskets, chimney cleaning rods and brushes, and more!
Catalogs:
Made with poly bristles and available in 3″, 4″, and 5″ round sizes. Heavy-duty ball tip guides brushes through narrow offsets and bends. Designed for heavy cleaning. Fittings are 1/4-20 thread. Use with RUTLAND. Rods 25P-5 and PSR-20 on page 24.
________________________________________________________________________________________________________
Specially designed for stainless steel, liners, and stove pipes. These sturdy poly brushes have 6″ of fill and are acid resistant. Fittings are 1/4″ NPT threading. Use in masonry and metal liners. Use in cool chimney only. Use with RUTLAND. Rods 10624, 10672, and KRK-18 on page 15.
________________________________________________________________________________________________________
Designed with the DIY homeowner in mind. Rods are available individually in lengths of 4′ and 6′ and use 1/4″ NPT threading to connect to a chimney brush. Attach to a RUTLAND. Chimney Sweep. Wire or Poly Brush to clean a chimney from the top down or up through the open fireplace. The fiberglass is flexible enough to handle slight offsets, but not enough to bend around sharp corners. Cleaning in an up-and-down motion with these rods will provide the power necessary for a satisfactory result.
________________________________________________________________________________________________________
Poly rods designed to easily maneuver through 30° and 45° offsets, 0.250″ diameter and 1/4-20 thread. Use with RUTLAND. Chimney Sweep. Pellet Stove Brushes.
An exceptionally strong dry-mix cement that chemically sets and dries as hard as brick. Just add water! Perfect for casting into custom designs because it holds its shape while drying. Can even be used as the sole material when casting a solid stove bed or outdoor oven. 2200° temperature rating. Does not require heat cure. Cast up to 9” depth. Color may vary.
USE: Fireplace, Wood Stove, Pellet Stove, Outdoor, Indoor
________________________________________________________________________________________________________
Designed to be the easiest gasket cement for affixing fiberglass gaskets to steel and cast iron. Very easy to spread and control application and will not expand or contract during continued use. Apply in beads of 1/8″ or less. 2000ÅãF temperature rating. New and improved, no longer requires heat cure. Black.
USE: Fireplace, Wood Stove, Indoor
________________________________________________________________________________________________________
Perfect for repairing small chips or cracked firebrick, re-pointing mortar joints between firebricks, and bonding firebricks together. Adheres masonry to masonry for brick, firebrick, and stone. Use for cracks 1/8″ deep or less. If deeper, apply multiple layers of ~1/8″ and allow 24 hours to dry between layers. Easy to apply with a caulking gun and will last for years. Sets as hard and as strong as firebrick after curing and can withstand the high temperatures produced by a wood fire. 2000° F temperature rating. Requires heat cure.
USE: Fireplace, Wood Stove, Indoor
________________________________________________________________________________________________________
Premixed and ready to use, this is one of the easiest cements to apply. Use this smooth consistency cement to bond and seal metal to metal or metal to masonry joints less than 1/8″. Repair a crack, seal the collar to the top of a wood stove, or seal between firebricks and prefabricated fireplace. Use anywhere a quality high temperature adhesive is required for furnaces, firebrick repair, filling gaps, sealing joints, or gluing ceramic logs. Adheres to metal, stone, and firebricks, creating a permanent smoke- and gas-tight seal. 2000ÅãF temperature rating. Heat cure required.
USE: Fireplace, Wood Stove, Indoor
________________________________________________________________________________________________________
A refractory mortar ideal for joining or repairing masonry flue tile in any gas or wood fireplace and wood, coal, or pellet stove chimney. Just add water, mix, and trowel on to seal and join flue tiles. It can also be used as a parge coating (thin overcoat) when building fireboxes to give a fireplace a nice, even, dark gray finish. Meets NFPA 211 Standards and NYSCMA Tek 4.0 Specifications. 2550° temperature rating. Does not require (but is stronger with) heat cure. If applying in layers, do not exceed 1″ per layer and allow 24 hours to dry between layers. Dark Gray.
USE: Fireplace, Wood Stove, Pellet Stove, Gas Fireplace, Outdoor, Indoor
Removes stubborn creosote or soot build-up on bricks or stone surrounding a fireplace. Industrial strength solvent will penetrate and dissolve build-up on most any stone or sealed brick without use of dangerous acids. Can also be used on an asphalt roof to remove chimney smoke and grime.
________________________________________________________________________________________________________
Non-scratching formula consisting of micro-scrubbers that remove baked-on soot, creosote, carbon, and other mineral residues from glass doors of fireplace inserts, and coal-, oil-, and wood-burning stoves and pellet stoves. Ammonia-free. Leaves behind a protective silicone layer to make future cleanings even easier!
________________________________________________________________________________________________________
Formulated to remove smoke, soot, and creosote residue from glass doors of fireplaces and wood stoves. Spray-on cleaner does not contain dangerous acids or ammonia. Just spray on and wipe off – it’s that easy! In no time at all, fireplace or stove glass will have that “like-new” appearance for continued enjoyment of leisure fires.
________________________________________________________________________________________________________
This versatile cleaner conditions, cleans, and protects a variety of surfaces. The ammonia-free formula is perfect for use on glass, thermal glass, stainless steel, chrome, aluminum, porcelain, tile, ceramic range top, oven doors, sealed stone, kerosene heater glass, and fiberglass shower doors. Clean citrus scent. NOT for use on cars, windows, plastic (ex. microwave oven doors), plexiglass, stainless look or chrome look finishes.
________________________________________________________________________________________________________
Specially formulated for the removal of white residue on gas log fireplace glass doors. Non-abrasive and easy to use, this glass cleaning cream does not scratch or cause micropitting. Ammonia-free.
Helps prevent dangerous creosote buildup in wood stoves and fireplaces Made with 100% recycled hardwood and powered by creosote concentrate technology.
USE: Fireplace, Wood Stove
________________________________________________________________________________________________________
Rutland’s Powerful creosote remover in convenient toss in packets. Made with Craft Paper. Concentrate formula 3x.
USE: Pellet Stove, Fireplace, Wood Stove
________________________________________________________________________________________________________
Keeps creosote build-up at bay! Add 1-2 scoops to a fire once per week or more often as needed. Safe for use in all chimneys and wood-burning appliances. Will not damage catalytic converters.
USE: Fireplace, Wood Stove
________________________________________________________________________________________________________
Great for all stove and flue types, but best for pellet stoves where granules fall through the burner pan. Spray on an existing fire or pre-treat fuel before adding to a fire to make a chimney safer and more efficient.
USE: Fireplace, Wood Stove, Pellet Stove, Outdoor, Indoor
________________________________________________________________________________________________________
Helps prevent dangerous creosote buildup in pellet stoves, wood stoves, and fireplaces. Concentrated creosote removing formula combined with high quality wood pellets dried to 2-5% moisture content. Recommended usage 2x/week
USE: Pellet Stove, Fireplace, Wood Stove
________________________________________________________________________________________________________
Helps prevent dangerous creosote buildup in pellet stoves, wood stoves, and fireplaces. Concentrated creosote removing formula combined with high quality wood pellets dried to 2-5% moisture content. Recommended usage 2x/week
USE: Pellet Stove, Fireplace, Wood Stove
________________________________________________________________________________________________________
Controls soot build-up in fireplaces, wood or coal stoves, furnaces, and boilers. Add 1-2 scoops to a fire once per week or more often as needed.
USE: Fireplace, Wood Stove
A thick, odor-free, gelled fire starter for quickly and easily starting any fire! Will not flavor food.
USE: BBQ, Grills, Smokers
________________________________________________________________________________________________________
Add beautiful and long-lasting blue, green, and purple flames to your wood burning fire with convenient packets. Light weight and portable. Great for making backyard memories.
USE: Fireplace, Fire Pit, Wood Stove, Outdoor, Indoor
________________________________________________________________________________________________________
Easy to light – even when wet – and burn up to 10 minutes per square! Only 1 – 2 squares are needed to start a fire. Simply break off 1 – 2 squares and set them on wood or pellets. Light by touching a flame to the rough edge of a square. These environmentally friendly, non-toxic squares are made of compressed recycled wood chips, paper fiber, and wax. Will not flavor food.
USE: BBQ, Grills, Smokers
________________________________________________________________________________________________________
Graphite impregnated, braided fiberglass gasketing engineered to provide superior sealing, protection, and longevity. Also resist abrasion, creosote and soot adhesion, and temperatures up to 1000ÅãF. Used by major stove manufacturers and to replace worn-out gaskets in wood and coal stoves or fireplace inserts. Annual replacement of stove gaskets ensures a tight seal for maximum airtight operation and efficiency.
KITS (Includes Gasket & Fiberglass Stove Gasket Cement) (6 per case)
Provide both a beautiful flat black finish as well as durability to any stove or grill, and will look great for years while keeping rust at bay. Use outdoors or indoors. Adhere to steel, cast iron, aluminum, and brick, and are great for grills, stoves, smokers, stove pipes, fireplace inserts, furnaces, barbecues, mailboxes, lampposts, fireplace tools, brass, firebrick, and chimney caps. Flat Black.
PREMIUM 1400°F BRUSH-On Paint with low VOC
1200°F HI-TEMP PAINTS
*Product 81 not for sale in California
USE: Outdoor, Indoor
________________________________________________________________________________________________________
Protects cast iron and steel heating and cooking appliances from getting dull and rusty. Apply polish and buff to a high luster to restore that like-new appearance. Safe to use – non-flammable and non-toxic. One bottle should lightly polish an average sized, free-standing wood stove or a large grill. Not for use on painted, powder-coated, sand-blasted, stainless, or raw steel surfaces. Black.
USE: Outdoor, Indoor
Not for sale in California
A great solution for sealant needs – seals off gases and smoke permanently, with limitless uses in the home or on job sites. Use to seal fireplace inserts, repair solar panels, or seal a chimney cap to withstand wind, rain, and hot smoke. Available in 600° F RTV and 500° F RTV temperature ratings and two colors (Red and Black) as well as Clear. Does not require a heat cure.
500° F RTV temperature rating and available in Black and Clear. Choose from a handy 2.7 fl oz tube for small repairs or a 10.3 fl oz caulk gun cartridge for larger jobs.
*Food safe, FDA regulation #21 CFR 177.2600.
________________________________________________________________________________________________________
A great solution for sealant needs – seals off gases and smoke permanently, with limitless uses in the home or on job sites. Use to seal fireplace inserts, repair solar panels, or seal a chimney cap to withstand wind, rain, and hot smoke. Available in 600° F RTV and 500° F RTV temperature ratings and two colors (Red and Black) as well as Clear. Does not require a heat cure.
600° F RTV temperature rating and available in Red and Black.
USE: Fireplace, Wood Stove, Pellet Stove, Gas Fireplace, Indoor, Outdoor
________________________________________________________________________________________________________
A non-permanent seal that expands and contracts with heat variations. For use with metal and aluminum. Use to install and maintain direct vent appliances, gas-burning systems, pellet stoves, and metal flues on wood and coal stoves. Easily removed for cleaning and inspection. Not an adhesive. 800° F continuous temperature rating. Black. Does not require a heat cure.
USE: Fireplace, Wood Stove, Pellet Stove, Gas Fireplace, Indoor, Outdoor
Not for sale in California
Monitors the performance of a wood- or coal-burning stove. See the potential for creosote build-up at a glance. Magnetically attaches to vertical, single-wall pipe or cooktop surface of a wood or coal stove. Indicates overheating or lowtemperature creosote build-up hazard.
USE: Wood Stove, Coal Stove, Indoor
________________________________________________________________________________________________________
These firebricks can be used to build new fireplaces or to replace old or broken bricks in existing fixtures (wood or coal stoves, furnaces, and fireplace inserts). Color may vary. They can also be used to line a fire pit in the backyard or anywhere else a brick is needed. Meets or exceeds residential building codes regarding fireplace and chimney construction. Color may slightly vary. Not for direct food contact. Each brick measures 9” x 4.5” x 1.25”.
USE: Outdoor, Indoor
________________________________________________________________________________________________________
5-blade, 60⁰ oscillating, heat-powered wood stove fan generates its own electricity from the heat of the stove. The fan starts automatically. The hotter the stove, the faster the fan blades rotate resulting in more air circulated. Rutland’s fans increase stove efficiency, decrease fuel usage, and warm rooms faster all with near silent operation. Designed for freestanding stoves with normal surface temperatures ranging between 122 – 650⁰ F. Needs no Electricity, Cords or Batteries. This powerful fan provides an industry leading 220 CFM!
USE: Wood Stove
